Archive for the ‘Car Amplifiers’ Category

Pyramid 2000 Watt 4-channel Bridgeable Amplifier

Pyramid 2000 Watt 4-channel Bridgeable Amplifier

This 4-channel Pyramid America amp is all you need to blast your music to new levels.

Pyramid 2000 Watt 4-channel Bridgeable Amplifier

This amp provides up to 500 watts of pure power or you could bridge this amp to one channel and 1000 watts.

Four channel amplification
4500W max output
500 Watts 2 front / 1000 Watts 1 rear
21000W Watts, 2 bridged
Dual variable bass boost (0-12DB at 50Hz)
Dual fully adjustable electronic crossovers
Soft turn On/Off circuit
2 Ohm Stereo stable
Bridgeable into 4 Ohms
Remote turn on
Dual Mosfet PWM power supplies
Variable gain control
Heavy duty aluminum alloy heat-sink
Hi/Low level inputs
High level Molex input
High impedance input
Power and protection LEDs
S/N ratio: >95DB
Frequency response: 15Hz-30KHz
THD <0.04-percent
Fully protected circuitry
Model: PB618
Dimensions: 10.24 inches wide x 2.26 inches high x 13.78 inches long

Kenwood KAC 7205 Car Amplifier

Kenwood KAC 7205 Car Amplifier

A built-in cooling fan and gold-plated RCA inputs help to enhance the high quality sound of this car Amplifier from Kenwood.

Kenwood KAC 7205 Car Amplifier

This 2-channel amp also has speaker-level inputs with signal sensing for automatic turn-on.

2-Channel class AB car Amplifier
2 ohms: 250 watts x 2 channel
4 ohms: 170 watts x 2 channel
Max power output: 500 watts x 2 channel
Bridged, 4 ohms: 500 watts x 1 channel
MOSFET power supply
LED power indicator
Speaker impedance: 2-8 ohms (4-8 ohms bridged)
Tuned bass EQ (0-18 dB bass boost at 40 Hz)
Bridgeable operation
Speaker-level inputs with signal sensing for automatic turn-on
Short circuit, DC offset, overload, and thermal protection circuitry
Preamp RCA outputs
Aluminum die cast heat sink
Gold-plated screw terminals
Built-in cooling fan
Gold-plated RCA level inputs
Variable low-pass filter (50-200 Hz, 24 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 5-50,000 Hz
Dimensions: 13.75 inches long x 2.25 inches high x 9.375 inches deep
4-Gauge power and ground leads recommended

Incoming search terms:

Pyramid 2000 Watt 2-channel Bridgeable Amplifier

Pyramid 2000 Watt 2-channel Bridgeable Amplifier

Update your system with this Pyramid bridgeable Amplifier.

This 2000W, two-channel, bridgeable amplifier makes use of a heavy duty aluminum alloy heat-sink and has fully protected circuitry.

2 Ohm Stereo stable
1 x 2000W Watts 2 bridged
Heavy duty aluminum alloy heat-sink
Bridgeable into 4 Ohms
Fully adjustable electronic crossovers
Hi/low level inputs
Mosfet PWM power supplies
Variable gain control
Variable bass boost (0-12DB at 50Hz)
High impedance input
High level molex input
Max output: 2 x 1000W
Fully protected circuitry
Frequency response: 15Hz-30KHz
S/N ratio: >95DB
THD: <0.04-percent
Dimensions: 10.24 inches wide x 2.26 inches high x 9.06 inches long
Model: PB918
Weight: 7 pounds

Pyramid 10 Band Graphic Equalizer Amplifier

Pyramid 10 Band Graphic Equalizer Amplifier

Pyramid 10 Band Graphic Equalizer Amplifier

Crank up the sound in your car with this Pyramid 10-band graphic equalizer
Car Amplifier features 12db boost/cut and power on/off switch
Amp has color illuminated LEDs
and multi-function LED display
150 watts x 2 maximum output
2 or 4 speaker hook-up
Fold down acrylic door
Built-in heavy duty aluminum heatsink
Fader and balance control
Floating/common GND high level wire harness
Low level rca input jacks
Frequency resp.: 20hz – 20khz
S/N ratio: better than 60db
Built-in fm antenna booster with switch
Output impedance:4-8 ohms allowable
FM antenna maximum sensitivity: 5db
For 12v dc negative ground systems
Dimensions: 6.88 inches wide x 6 inches deep x 1.5 inches high

Incoming search terms:

Power Acoustik – 2000W Class D Mono Amplifier with Bridging Synchronization

Power Acoustik – 2000W Class D Mono Amplifier with Bridging Synchronization

With a remote dash-mount bass knob and variable low-pass and subsonic filters, this 1-ohm stable amp puts the power to control your music at your fingertips.

Power Acoustik – 2000W Class D Mono Amplifier with Bridging Synchronization

What’s Included

  • Power Acoustik 2000W Class D Mono Amplifier with Bridging Synchronization
  • Remote dash-mount bass knob with cable
  • Owner’s manual

Product Features

  • From our expanded online assortment; not available in all Best Buy stores
  • Professional installation is strongly recommended for this product.
  • Handles up to 2000W maximum power @ 4 ohms
    1200W continuous @ 1 ohm for remarkably powerful sound.
  • 1-ohm stable
    Low-impedance output delivers added power without distortion.
  • High-speed digital circuitry
    For stable, responsive operation.
  • Pulse-width modulation (PWM) power supply
    For clean, efficient power to drive your system.
  • 4-way protection circuitry
    Along with the system-distress indicator help safeguard your system.
  • 40-200Hz variable low-pass filter
    And 20-50Hz variable subsonic filter allow you to direct frequencies to the proper speakers.
  • Variable subwoofer EQ
    With remote dash-mount bass knob lets you adjust bass response.
  • Platinum-plated heavy-duty power and speaker terminals
    With dual mono speaker output connectors for secure, high-performance connections.

Incoming search terms:

Kenwood – 1000W Class D Mono Amplifier with Low-Pass Crossover

Kenwood – 1000W Class D Mono Amplifier with Low-Pass Crossover

This Amplifier features a fan to keep components cool and speaker-level and line-level inputs for an easy connection. The low-pass crossover delivers flexible operation.

Kenwood – 1000W Class D Mono Amplifier with Low-Pass Crossover

What’s Included

  • Kenwood 1000W Class D Mono Amplifier with Low-Pass Crossover
  • Owner’s manual

Product Features

  • Professional installation is strongly recommended for this product.
  • Bass boost
    Delivers brilliant audio.
  • Built-in fan
    Keeps components cool.
  • Speaker-level and line-level input
    With signal sense turn on for an easy connection.
  • Handles up to 1000W maximum power (1000W x 1) @ 2 ohms
    For brilliant audio.
  • Handles up to 500W RMS power (500W x 1) @ 2 ohms or 300W (300W x 1) @ 4 ohms
    For powerful sound.
  • Low-pass crossover
    Ensures flexible operation.

Incoming search terms:

Kicker – DX Series 400W Class AB 4-Channel MOSFET Amplifier with Variable Crossovers

Kicker – DX Series 400W Class AB 4-Channel MOSFET Amplifier with Variable CrossoversVariable

Upgrade your car audio system with this 400W amplifier that features variable low-pass, high-pass and full-range filters for custom sound. Top-mounted boost, gain and crossover controls provide easy access.

Kicker – DX Series 400W Class AB 4-Channel MOSFET Amplifier with Variable Crossovers

What’s Included

  • Kicker DX Series 400W Class AB 4-Channel MOSFET Amplifier with Variable Crossovers
  • Owner’s manual

Product Features

  • Geek Squad installation is strongly recommended for this product.
  • Produces up to 100W RMS continuous power @ 2 ohms or 50W RMS @ 4 ohms
    For powerful audio.
  • High-pass, low-pass and full-range crossover
    Ensures flexible operation.
  • 3 automatic turn-on modes
    Include remote, DC offset and signal sense.
  • Balanced differential inputs
    For compatibility with a variety of Car Stereo installations.
  • LED power and protection indicator
    Make it easy to monitor the amplifier’s status.
  • 2- and 4-ohm impedance support
    Conducts power evenly to keep the speaker at an appropriate level.
  • 20Hz – 20kHz frequency response
    For faithful full range sound reproduction.
  • Boost, gain and tuned bass EQ controls
    With up to 18dB bass boost at 40Hz make it easy to customize sound output.

Power Acoustik – 1600W Class AB Bridgeable 4-Channel MOSFET Amplifier

Power Acoustik – 1600W Class AB Bridgeable 4-Channel MOSFET Amplifier

Get more out of your Car Stereo by adding this 4-channel amp that delivers a clean 1600 watts of MOSFET power (bridged) and provides an easy connection to a subwoofer without adding another amp to your setup.

Power Acoustik – 1600W Class AB Bridgeable 4-Channel MOSFET Amplifier

What’s Included

  • Power Acoustik 1600W Class AB Bridgeable 4-Channel MOSFET Amplifier
  • Owner’s manual

Product Features

  • From our expanded online assortment; not available in all Best Buy stores
  • Professional installation is strongly recommended for this product.
  • Handles up to 1600W maximum power
    360W continuous @ 4 ohms bridged gives your car audio system a powerful sound.
  • 3-way protection circuitry
    Helps safeguard the amp in case of problems in your system.
  • Full selectable 30-250Hz crossover
    With a variable 40-250Hz low-pass/high-pass filter and a 24dB bass boost to give your system a full range of frequency responses.
  • Pulse-Width Modulation (PWM) circuitry
    For efficient, effective operation of the amplifier.
  • Full MOSFET power supply
    For clean, conditioned power.
  • Tri-mode capable
    Lets you run a subwoofer along with 2 speakers from 1 amp.

Kicker – DX Series 1000W Class D Mono MOSFET Amplifier with Low-Pass Crossover

Kicker – DX Series 1000W Class D Mono MOSFET Amplifier with Low-Pass Crossover

This 1000W Amplifier features variable low-pass and a high-pass subsonic filters along with gain and bass boost for custom sound. A high-density convection heat sink dissipates heat.

Kicker – DX Series 1000W Class D Mono MOSFET Amplifier with Low-Pass Crossover

What’s Included

  • Kicker DX Series 1000W Class D Mono MOSFET Amplifier with Low-Pass Crossover
  • Owner’s manual

Product Features

  • Geek Squad installation is strongly recommended for this product.
  • Produces 1000W RMS continuous power @ 2 ohms or 550W RMS @ 4 ohms
    For powerful audio.
  • Variable low-pass and variable high-pass subsonic filters
    Along with boost and gain controls and a tuned bass EQ with up to 18dB bass boost at 40Hz, make it easy to customize sound output.
  • High-density convection heat sink
    Dissipates heat for enhanced operation.
  • 3 automatic turn-on modes
    Including remote, DC offset and signal sense, along with gold-plated, balanced RCA level inputs and RCA preamp outputs for compatibility with a variety of Car Stereo installations.
  • LED power and protection indicator
    Makes it easy to monitor the amplifier’s status.
  • 2- and 4-ohm impedance support
    Conducts power evenly to keep the speaker at an appropriate level.
  • 10-200Hz frequency response
    For faithful low-frequency sound reproduction.
  • Muting circuit
    Cancels noise interference to improve sound quality.

Incoming search terms:

Power Acoustik – 1200W Class AB Bridgeable 4-Channel MOSFET Amplifier with Variable Crossovers

Power Acoustik – 1200W Class AB Bridgeable 4-Channel MOSFET Amplifier with Variable CrossoversMOSFET

Get the power to rock your ride with this 1200W amp that features full MOSFET power and Pulse-Width Modulation circuitry for clean, efficient operation.

Power Acoustik – 1200W Class AB Bridgeable 4-Channel MOSFET Amplifier with Variable Crossovers

What’s Included

  • Power Acoustik 1200W Class AB Bridgeable 4-Channel MOSFET Amplifier with Variable Crossovers
  • Owner’s manual

Product Features

  • From our expanded online assortment; not available in all Best Buy stores
  • Professional installation is strongly recommended for this product.
  • Delivers up to 1200W peak power
    250W continuous @ 4 ohms bridged. Full MOSFET power supply lets you enjoy your music loud and clear.
  • 3-way protection circuit
    Helps safeguard the amplifier from excessive loads.
  • 97dB signal-to-noise ratio
    Provides faithful reproduction of audio sources with minimal distortion.
  • Variable 0-24dB bass boost
    Lets you adjust the bass response.
  • Pulse-Width Modulation (PWM) circuitry
    For optimal amplifier operation.
  • Tri-mode capable
    For flexible speaker configuration.
  • Variable crossovers
    40-250Hz low-pass and high-pass crossovers allow you to direct frequencies to the proper speakers.
Powered by WordPress | Designed by WP Themes